Physics · Middle school / High school
Specific heat capacity: why does one sample warm more?
Two samples start at 20 °C and each absorbs 5 kJ. One ends up 5 °C warmer than the other. Start with the same mass for each sample and ask what material property could account for the difference. The lab lets you change that property and watch the lines move.
Use specific heat to predict the temperature rise
In this model Q = mcΔT, where Q is the heat absorbed in joules, m is the mass in kilograms, c is the specific heat capacity and ΔT is the rise in temperature. A specific heat of 500 J/(kg·°C) means that raising one kilogram by one degree Celsius takes 500 J. An equal mass of the sample with a specific heat of 1,000 J/(kg·°C) needs twice as much energy for the same rise.
Keep both samples at 1 kg and supply 5 kJ, or 5,000 J, to each. Sample A rises by 5,000 ÷ (1 × 500) = 10 °C, while B rises by 5,000 ÷ (1 × 1,000) = 5 °C. The temperature readings are 30 °C and 25 °C because both started at 20 °C. Find the two points at 5 kJ and notice that their heights are the rises.
Read the slopes and test one change at a time
Keep the two specific heats fixed and double the mass of each sample to 2 kg. The same 5 kJ now raises the samples by 5 °C and 2.5 °C. Both slopes halve as well. With heat input in kJ along the horizontal axis, a slope of 1 °C per kJ means the temperature goes up one degree for each additional kilojoule.
Return the mass to 1 kg and vary the specific heat of A. At 1,000 J/(kg·°C), A and B respond identically and the solid and dashed lines coincide. Beyond that value, A's line is shallower. With the mass matched, you can identify the larger specific heat by reading which line rises less for the same horizontal move.
Check your understanding
Set both masses to 2 kg and A's specific heat to 1,500 J/(kg·°C). Add 6 kJ to each sample. How much warmer is one sample than the other, and what are their final temperatures?
Show the explanation
A rises by 6,000 ÷ (2 × 1,500) = 2 °C and B rises by 6,000 ÷ (2 × 1,000) = 3 °C. B finishes at 23 °C, which is 1 °C above A's 22 °C.
What the model assumes
The two specific heat values are illustrative. The model assumes the supplied heat all goes into warming a sample, specific heat stays constant, and neither sample changes state. An actual heater can warm the container and lose energy to the surroundings. The interactive lab requires Family Plus or Teacher access.