Physics · Middle school
How does the same force produce a different pressure?
Two flat contact faces each carry a perpendicular force of 100 N. One face can change its width and length, while the reference face stays at 10 × 10 cm. Use the experiment to compare the areas and predict which face has the greater average pressure.
Divide force by area in square metres
Pressure describes how much perpendicular force acts per unit area. The average normal pressure is p = F/A. For 100 N over a 10 × 10 cm contact face, the area is 100 cm². A square centimetre is 0.0001 m², so 100 cm² is 0.0100 m². The pressure is 100 ÷ 0.0100 = 10,000 Pa. One pascal is one newton per square metre.
Keep the length of A at 10 cm and reduce its width to 5 cm. Its area halves to 50 cm², or 0.0050 m². The force remains 100 N, so pressure doubles to 20,000 Pa. The reference face still has a pressure of 10,000 Pa. Follow the same-scale drawings and check that both force labels remain unchanged.
Change one condition at a time
With A still at 5 × 10 cm, increase the force to 200 N. Its pressure doubles again to 40,000 Pa, while the reference pressure becomes 20,000 Pa. The ratio stays at two because both forces changed by the same factor. Now keep the force and set A to 20 × 20 cm. Its 400 cm² area is four times the reference area, so its pressure is one quarter of the reference pressure.
Try A at 5 × 20 cm and then at 10 × 10 cm under 100 N. The shapes differ, but both areas are 100 cm² and both give 10,000 Pa in this average-pressure model. Finally set the force to zero. Both readings become 0 Pa, whatever positive area you choose.
Check your understanding
Under 200 N, compare a 5 × 10 cm contact with the fixed 10 × 10 cm reference. Calculate both pressures and explain what changes if A becomes 10 × 10 cm.
Show the explanation
A has 0.0050 m² of area and a pressure of 40,000 Pa. The reference has 0.0100 m² of area and a pressure of 20,000 Pa. Enlarging A to match the reference gives the same 20,000 Pa under the same force.
What the model assumes
This model calculates average normal pressure on a flat rectangular contact. It treats the contact area as fully loaded and ignores deformation, material stiffness and uneven pressure near edges. It does not calculate indentation depth or damage. The interactive experiment requires Family Plus or Teacher access.